Before You Start
There are four mounting options in total: vertical or horizontal orientation, each with or without the hanging hook.
- Remove the Rubber Foot Pads from the bottom for wall mounting.
- Prepare: drill, drill bits, screwdriver, hammer, plastic anchors, screws, level, tape, safety strap.
Method 1 — Basic Wall Mount (No Hanging Strap)
Steps:
1.Choose Alignment Sticker
Use either the Horizontal or Vertical Alignment Sticker depending on your preferred orientation.
2.Drill Holes
Drill holes at the sticker marks, keeping the drill perpendicular to the wall.
3.Insert Anchors & Screws
Place plastic anchors in the holes and screw in screws, leaving 3–5mm of the screw head for hanging.
4.Hang the Calendar
Align the hanging slots on the back with the screws and slide the calendar into place.Ensure it is level and secur
Method 2 — Hook Installation (With Hanging Strap)
Steps:
1.Attach Mounting Template
Place the template on the wall to mark drilling points.
2.Drill Holes & Insert Anchors
Drill holes and insert plastic anchors.
3.Install Hook Base & Cap
Secure the Hanging Mount Base with screws, then attach the Hook Cap.
4.Attach Clips & Straps
Install Attachment Clips on the calendar and slide on the safety strap over the hanging strap.
5.Hang the Calendar
Hang the calendar on the hook and ensure it is level and secure.
Check
- Ensure the calendar is level and stable.
- Gently test the installation.
- Verify the safety strap is in place.